Freestanding Deadweight Anchor Systems
The freestanding counterweight anchor provides a temporary tie-off point for personnel working on flat roofs or structures.
Why use a Deadweight Anchor?
Falls are the leading cause of death on construction sites, and with the new, tighter OSHA regulations for residential construction which took effect on September 15, 2012, every roof worker needs proper fall protection. The freestanding counterweight anchor provides a tie-off point for personnel performing work on flat roofs or structures. It is non-penetrating to eliminate damage to the working surface, and assembles from sixteen separate, easy-to-carry counterweights, allowing the installer to never have to lift more than 45 pounds while installing the anchor.
||Freestanding Deadweight Anchor
||Click for pricing
||Single Counterweight Only, 45 lbs. (20.3kg)
Features of Evolution Counterweight Anchor
- Non penetrating design does not attach to working surface, reducing the possibility of damage.
- Built-in shock absorbing post provides added safety to user and structure.
- Complies with all safety standards for users weighing up to 310 pounds
- Fall arrest and restraint rated for one worker for jobsite versatility.
- Certified for use with SRL's, shock absorbing lanyards and rope grabs.
- Approved for use on these roof types: concrete, single ply membrane, bitumen membrane, asphalt sanded and asphalt stone chippings.
- Ideal for use on flat surfaces up to a maximum of 5 degrees slope/pitch
- Counterweights are 45 pounds (20.3 kg) and come with an integral carrying handle for easy transport and set up.
Installation of a Counterweight Roof Anchor
Installation of the anchor system is simple, fast and efficient. Due to its modular design, the installer will never have to lift more than 45 lbs. (20.3kg). In some applications, the entire system can be lifted (by forklift or crane) into place for instant set-up and use.
Freestanding Counterweight Anchors are placed on top of the working surface. Weighted bases are added to rubber trays that are connected to a shock absorbing tie-off post. The anchor's freestanding design installs without penetrating the roof, saving valuable time and money. Also, the design reduces the possibility of roof leaks, voided roof warranties and surface damage.
Specialized Load Distributing Design
This anchor incorporates a revolutionary shock absorbing system called LEAP™. The LEAP™ post (with tie-off point) works to absorb the energy created in the event of a fall so that the worker attached to it is not the one absorbing the force and energy of the fall. This specialized design provides added safety to the attached worker and better distributes the forces to the anchor and structure. By limiting and distributing the forces this way, not only is the worker safer but also the integrity of the roof is preserved.
Engineered Fall Protection provides deadweight Anchors Systems; serving clients from coast to coast, Canada, Mexico and especially focused in the states of Missouri, Illinois, Indiana, Kansas, Arkansas, Mississippi, Nebraska, Tennessee, Kentucky, Iowa, and Oklahoma.